Product center
ZigongProduct Model: TZT0030
Category:
Product Description
Sysmyk ® Anti-reflective and Transmittance-enhancing Coating Solution (AR)
[Product Code] TZT0030
[Product Features]
TZT0030 is a single-component, ultra-hydrophilic, antistatic, dust-repellent, and light-transmitting inorganic nanocoating developed by Hisonic. It is designed for use on glass products such as photovoltaic glass, cameras, and lenses to reduce reflection, glare, and enhance light transmission. Utilizing a nanoscale silica fractal combination technology, this coating forms micro-roughness with features smaller than 50 nm on the surface of objects. After curing, the ultra-thin coating exhibits a hydrophilic contact angle of less than 10°. Being entirely inorganic, the coating boasts excellent weather resistance and abrasion resistance. Additionally, it effectively suppresses static electricity generation on the substrate surface, making it difficult for dust particles to adhere. Even if dust does accumulate, it can self-clean upon contact with water, ensuring that the glass surface remains consistently transparent and clean. Compared to conventional anti-reflection and light-transmitting coatings, TZT0030 offers superior abrasion resistance and enhanced light transmission, with an improvement in light transmission efficiency ranging from 2.8% to 3.5%.
1. Pure inorganic composition, with a durability of over 5 years.
2. It can be fully cured at 100℃ for 5-10 minutes, or it can also be cured at room temperature.
3. Excellent wear resistance, superior antistatic performance, surface resistivity between 10⁶ and 10⁹ Ω, high transparency, low refractive index, and dust-resistant.
4. A transparent, colorless liquid that, once film-forming, consists of 100% inorganic components—non-toxic, non-polluting, and non-corrosive.
5. High chemical resistance, high hardness, and ultra-hydrophilic self-cleaning properties
6. After rain or rinsing with water, no manual wiping is required—no water marks remain, ensuring the substrate surface stays clean for a long time and achieving self-cleaning performance.
[Applicable Materials]
Photovoltaic glass, solar modules, lenses, cameras
【Curing Method】
100℃ for 5–10 minutes, or leave at room temperature for 24 hours.
【Scope of Application】
1. Photovoltaic glass with self-cleaning, light-transmitting, and dust-resistant treatment
2. Anti-reflective and wear-resistant coatings for lenses and cameras
[Technical Parameters]
[Construction Method]
Pre-construction Preparation and Precautions
1. Before spraying, first perform surface treatment on the object to be coated. Use a neutral detergent to remove oil stains and debris from the surface, then rinse thoroughly with clean water. The surface must be free of oil stains, dust, and water marks. Begin construction only after the surface has completely dried.
2. The cleaned surface should be coated promptly to prevent dust from settling again.
3. The construction temperature should be between 20-35℃, and the relative humidity should be between 30-70%.
Construction method
1. Spray coating, roller coating, or dip coating treatment
2. One-time treatment, valid for 5 years
[Storage]
Recommended storage temperature: 18–25℃
Shelf life: 6 months
[Packaging]
5 kg/bucket, 20 kg/bucket
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
