TaizhouProduct Model: YCP0051KT

For photovoltaic glass surfaces, it offers easy cleaning, rust resistance, and prevents the formation of hard deposits such as calcium carbonate and calcium sulfate.

Category:

TaizhouPhotovoltaic Applications

Phone: 400-888-8888

Inquiry

Product Description

Sysmyk® Photovoltaic-Specific Easy-Clean, Long-Lasting Hydrophobic and Oleophobic Anti-Fouling Nanocoating

[Product Code] YCP0051KT

[Product Features]

YCP0051KT is a special single-component, long-lasting, easy-to-clean nano-coating developed by Hysenmec. It utilizes the latest nano-hybrid technology and is specifically designed as a room-temperature, air-drying nano-product for the glass surfaces of distributed photovoltaic modules. The coating is simple and convenient to apply—simply spread it evenly using a scraper. Once cured at room temperature, this coating enhances glass transparency and provides exceptional hydrophobicity, oleophobicity, and outstanding anti-fouling performance. It effectively prevents the formation of hard deposits such as calcium carbonate and calcium sulfate on the glass surface and boasts excellent cleanability; oil stains and other contaminants can be easily removed with just water. Surfaces treated with this nano-coating can offer protection and anti-fouling performance for over three years.

1. Cures at room temperature, with a coating hardness of up to 6H.

2. Easy to clean—surface dirt can be easily wiped away.

3. Excellent resistance to acid and alkali corrosion

4. The coating film boasts high gloss and excellent fullness.

5. Excellent anti-fouling properties with low surface energy and outstanding wear resistance.

6. Possesses excellent hydrophobic and oleophobic properties, resists rust, and prevents the formation of hard deposits caused by contaminants such as calcium carbonate and calcium sulfate.

[Applicable Materials]

Photovoltaic module glass

【Curing Method and Construction Method】

Cures at room temperature; reaches 70% cure within 6–8 hours, and requires 24 hours for full cure.

【Scope of Application】

The glass of photovoltaic modules is easy to clean and features hydrophobic, oleophobic, anti-rust, and anti-scaling properties, preventing the formation of hard deposits from contaminants such as calcium carbonate and calcium sulfate.

VI Technical Parameters

Ⅶ Construction Method

Pre-construction preparation

1. Before spraying, first perform surface treatment on the photovoltaic glass to be coated, removing any old paint films, rust, oil stains, oxide scales, and foreign debris from the surface. The surface must be free of rust, oil stains, dust, and water marks.

2. The cleaned surface should be coated promptly to prevent dust from settling again.

Coating

1. Before use, thoroughly mix well. You can apply the product using a dedicated tool via scraping or troweling.

2. Recommended coating film thickness: 4–8 micrometers

3. Construction temperature: 10–30 °C, relative humidity: 45%–75%.

VIII Storage

Recommended storage temperature: 18–25℃

Shelf life: 6 months

Ⅸ Packaging

1L/bucket, 5L/bucket

X Environmental Protection

Safety recommendations/transportation regulations—please read the product’s MSDS manual.