Share to
Product Model: YCP0066E5
Still hesitating? Get a sample first, contact us!
Category:
Keywords:
- Product Description
-
Sysmyk® Easy-to-Clean, Long-Lasting Hydrophobic and Oleophobic Nano Anti-Fouling Coating
Ⅰ Product Code YCP0066E5
Ⅱ Product Features
Sysmyk® is a special, single-component, long-lasting, easy-to-clean nanocoating with hydrophobic and oleophobic properties. It is formulated using nano-hybrid technology. After curing, this coating boasts an appealing metallic texture, excellent water- and oil-repellent performance, and outstanding anti-fouling capabilities. Additionally, it features easy-clean properties—oil stains and grime on the surface can be effortlessly wiped away. With this nanocoating applied to sinks, oil droplets will automatically slide off, and any residual traces of oil will naturally contract into tiny beads. As a result, daily cleaning of range hoods becomes simple and convenient for household users, eliminating the hassle of dealing with stubborn grease buildup. Moreover, this coating enhances the protection, gloss, and stain-resistant performance of stainless steel surfaces.* Medium-temperature curing; the coating film hardness can reach 3H.
* Easy to clean—surface dirt can be easily wiped away.
* Excellent resistance to acid and alkali corrosion
* Resistant to various household detergents
* High gloss and excellent fullness of the paint film
* Low surface energy with excellent anti-fouling properties and outstanding abrasion resistance
* Exhibits excellent hydrophobic and oleophobic properties, with a surface tension of less than 24 dynes and a water contact angle of 105 degrees.
* Excellent abrasion resistance, up to 5,000 cycles, without affecting the coating’s anti-fouling performance.
Ⅲ Applicable Materials
Brushed stainless steel
Ⅳ Curing Method
Heat-cured
V. Scope of Application
Easy-to-clean hydrophobic and oleophobic treatment on the sink surface
VI Technical Parameters
Ⅶ Construction Method
Pre-construction preparation
1. Before spraying, first perform surface treatment on the object to be coated, removing oil stains, dirt, and debris from the surface. The surface must be free of oil stains, dust, and water marks.
2. The cleaned surface should be sprayed promptly to prevent recontamination by dust.
3. The construction environment must be dust-free and equipped with ventilation systems or corresponding air-dust removal equipment to ensure construction quality.
Coating
1. Stir thoroughly before use; air spraying can be used for application.
2. Spray pressure: 0.3–0.4 MPa; spray distance: 15–25 cm; recommended coating film thickness: 5–15 μm.
3. Construction temperature: 10–30 °C, relative humidity: 45%–75%.
4. The cleanliness of the spray booth shall be at or below Class 10,000, meaning that the number of dust particles with a particle size ≥ 0.5 μm per cubic foot shall be less than 10,000.
5. The cleanliness of the leveling zone and baking zone shall be within Class 100,000, meaning that the number of particles with a particle size ≥ 0.5 μm per cubic foot shall be less than 100,000.
VIII Storage
Recommended storage temperature: 18–25℃ Shelf life: 6 months
Ⅸ Packaging
20 kg/bucket
Product Model: YCP0066E5
Still hesitating? Get a sample first,Contact us!
Category:
Keywords:
Request a quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
