Share to
Product Model: YCP0066
Still hesitating? Get a sample first, contact us!
Category:
Keywords:
- Product Description
-
Sysmyk ® Sandblasted Stainless Steel with Easy-to-Clean, Long-Lasting Hydrophobic, Oleophobic, and Anti-Fouling Nano-Coating
Ⅰ Product Code YCP0066
Ⅱ Product Features
Sysmyk® The easy-to-clean, long-lasting hydrophobic and oleophobic nano-coating is a single-component, long-lasting, easy-to-clean nano-coating introduced by Guangzhou Xisenmeike New Materials Technology Co., Ltd. from SYSMEK GMBH AG & CO., LTD. in the UK. It utilizes nano-hybrid technology. After curing, this coating exhibits excellent... Metallic texture, highly effective water- and oil-repellent properties, and excellent anti-fouling performance. , while also possessing Easy to clean Its unique properties allow surface grease and stains to be easily wiped away. After the sink is treated with this nano-coating, oil droplets will automatically slide off, and any remaining trace amounts of grease will naturally shrink into tiny beads. As a result, daily cleaning of kitchen range hoods becomes simple and convenient for household users, eliminating the hassle of dealing with thick layers of grease. At the same time, this coating can also enhance the durability of stainless steel. Protection, polishing, and stain resistance Effect.# Medium-temperature curing, with a coating hardness of up to 3H
# Easy to clean—surface dirt can be easily wiped away.
# Excellent resistance to acid and alkali corrosion
# Resistant to various household detergents
# High gloss and excellent fullness of the paint film
# Low surface energy with excellent anti-fouling properties and outstanding abrasion resistance
# Exhibits excellent hydrophobic and oleophobic properties, with a surface tension of less than 24 dynes and a water contact angle of 105 degrees.
# Excellent abrasion resistance—up to 5,000 cycles—without compromising the coating’s anti-fouling performance.
Ⅲ Applicable Materials
Brushed stainless steel
Ⅳ Curing Method
Heat-curing
V. Scope of Application
Easy-to-clean hydrophobic and oleophobic treatment for sink surfaces
VI Technical Parameters
Ⅶ Construction Method
Pre-construction preparation
1. Before spraying, first perform surface treatment on the object to be coated, removing any old paint films, rust, oil stains, oxide scales, and foreign matter from the surface. The surface must be free of rust, oil stains, dust, and water marks.
2. The cleaned surface should be sprayed promptly to prevent recontamination by dust.
3. The construction environment must be dust-free and equipped with ventilation systems or corresponding air-dust removal equipment to ensure construction quality.
Coating
1. Stir thoroughly before use; air spraying can be used for application.
2. Spray pressure: 0.3–0.4 MPa; spray distance: 15–25 cm; recommended coating film thickness: 5–15 μm.
3. Construction temperature: 10–30 °C, relative humidity: 45%–75%
4. The cleanliness of the spray booth shall be at or below Class 10,000, meaning that the number of dust particles with a particle size ≥0.5 μm per cubic foot shall be less than 10,000.
5. The cleanliness of the leveling zone and baking zone shall be within Class 100,000, meaning that the number of particles with a diameter ≥ 0.5 μm per cubic foot shall be less than 100,000.
VIII Storage
Recommended storage temperature: 18–25℃ Shelf life: 6 months
Ⅸ Packaging
20 kg/bucket
X Environmental Protection
Safety recommendations/transportation rules—please read the product. MSDS Manual
Product Model: YCP0066
Still hesitating? Get a sample first,Contact us!
Category:
Keywords:
Request a quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
