Product center
XintaiProduct Model: ZCP0031 & ZCP0032
Category:
Product Description
Sysmyk® Acid- and Corrosion-Resistant Nanocoating for Photovoltaic Glass (Room-Temperature Curing, Two-Component)
[Product Codes] ZCP0031, ZCP0032
[Product Features]
ZCP0031 is a special two-component, room-temperature self-drying, long-lasting, acid-resistant, and anti-corrosion nano-coating developed by Hysenmec. It is a specialized functional resin produced via copolymerization of tetrafluoroethylene and vinyl monomers. By incorporating specially formulated nanoparticles, this coating ultimately achieves exceptional weather resistance, antifouling properties, corrosion resistance, acid resistance, and alkali resistance. The coating boasts a durability of over three years. To enhance adhesion to glass substrates, apply ZCP0032 as a primer before proceeding with either brushing or scraping on ZCP0031.
◼ Cures at room temperature; surface dry in 10–20 minutes, and full curing takes 24 hours.
◼ Strong acid resistance, capable of withstanding hydrofluoric acid corrosion and providing effective protection for 3 years.
◼ Corrosion-resistant, protecting the aluminum frame
◼ Significant anti-reflection performance: After construction, the reflectivity of photovoltaic modules is reduced to 0.6–1.6.
[Applicable Materials]
Photovoltaic module glass
【Curing Method】
Self-drying at room temperature
【Scope of Application】
Roof-mounted photovoltaic power stations for plants in special corrosive environments (steel mills, electrolytic aluminum plants)
[Technical Parameters]
[Construction Method]
Pre-construction preparation
1. Before applying the coating, first perform surface treatment on the photovoltaic glass using the matching QCP0090S (multifunctional cleaning agent for photovoltaic glass). (Depending on site conditions, dilute with water at a ratio of 0 to 5 times the volume of the cleaner.) This step removes oil stains, glass oxide films, and residual anti-reflective and light-transmitting coatings from the surface. It is recommended to directly spray QCP0091S onto the surface, wait for 30 seconds to 1 minute, then use photovoltaic glass cleaning equipment to process the surface. After processing is complete, simply rinse thoroughly with clean water.
2. The cleaned surface should be sprayed promptly to prevent dust from reattaching.
3. After thoroughly cleaning and ensuring the surface is completely dry, apply ZCP0032 by spraying. Wait 5–10 minutes before proceeding with the application of ZCP0031.
Construction method
1. Scraping and coating
2. After thoroughly mixing components A and B at a ratio of 9:1, you can proceed with construction. The mixed material must be used within 2 hours; otherwise, it may gel and become unusable.
3. One-time treatment, valid for 3 years
[Storage]
Recommended storage temperature: 18–25℃
Shelf life: 12 months
[Packaging]
Component ZCP0031A: 18 kg per drum; Component ZCP0031B: 2 kg per drum; ZCP0032: 20 L per drum
[ Environmental protection
Safety recommendations/transportation regulations—please refer to the product’s MSDS manual.
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
