ShantouProduct Model: YCP0011

Easy-to-clean, hydrophobic and oleophobic treatment for metal surfaces such as stainless steel.

Category:

ShantouIndustrial Applications

Phone: 400-888-8888

Inquiry

Product Description

Sysmyk ^® High-hardness, easy-to-clean, long-lasting hydrophobic and oleophobic nano-coating

[Product Code] YCP0011

[Product Features]

Sysmyk ^® The easy-to-clean, long-lasting hydrophobic and oleophobic nano-coating is a special one-component, long-lasting, easy-to-clean nano-coating developed by Hysenmec, utilizing the latest nano-hybrid technology. After curing, this coating boasts an excellent metallic texture, exceptional water- and oil-repellent properties, and outstanding anti-fouling performance. At the same time, it features easy-clean characteristics—oil stains and grime on the surface can be effortlessly wiped away. With this nano-coating applied to range hoods, oil droplets will automatically slide off, and any residual traces of oil will naturally contract into tiny beads. As a result, daily cleaning of range hoods becomes simple and convenient for household users, eliminating the hassle of dealing with stubborn grease buildup. Moreover, this coating also enhances the protection, glossiness, and stain-resistant performance of stainless steel surfaces.

◼ Medium-temperature curing; the coating film hardness can reach 4H.
◼ Easy to clean—surface dirt can be easily wiped away.

◼ Excellent resistance to acid and alkali corrosion

◼ Resistant to various household detergents
◼ High gloss and excellent fullness of the coating.

◼ Low surface energy with excellent anti-fouling properties and outstanding abrasion resistance.

◼ Exhibits excellent hydrophobic and oleophobic properties, with a surface tension of less than 24 dynes.

[Applicable Materials]

◼ Brushed stainless steel

【Curing Method】

◼ Heat-curing

【Scope of Application】

◼ Easy-to-clean, hydrophobic and oleophobic treatments for metal surfaces such as stainless steel

[Technical Parameters]

[Construction Method]

◼ Pre-construction preparation
1. Before spraying, first perform surface treatment on the object to be coated, removing any old paint films, rust, oil stains, oxide scales, and other debris from the surface. The surface must be free of rust, oil stains, dust, and water marks.
2. The cleaned surface should be sprayed promptly to prevent dust from reattaching.
3. The construction environment must be dust-free and equipped with ventilation systems or corresponding air-dust removal equipment to ensure construction quality.

◼ Coating

1. Stir thoroughly before use; air spraying can be used for application.

2. Spray pressure: 0.3–0.4 MPa; spray distance: 15–25 cm; recommended coating film thickness: 5–15 μm.

3. Construction temperature: 10–30 °C, relative humidity: 45%–75%

4. The cleanliness of the spray booth shall be at or below Class 10,000, meaning that the number of dust particles with a particle size ≥0.5 μm per cubic foot shall be less than 10,000.

5. The cleanliness of the leveling zone and baking zone shall be within Class 100,000, meaning that the number of particles with a particle size ≥ 0.5 μm per cubic foot shall be less than 100,000.

[Storage]

Recommended storage temperature: 18~25°C

Shelf life: 3 months

[Packaging]

Single-component, 20 kg/barrel

[Environmental Protection]

Safety recommendations/transportation regulations—please refer to the product’s MSDS manual.