Product center
TexasProduct Model: YCP0002
Category:
Product Description
Sysmyk® Stainless Steel Easy-to-Clean, Long-Lasting Hydrophobic and Oleophobic Anti-Fouling Nano-Coating (Appliqué Type)
Ⅰ Product Code YCP0002
Ⅱ Product Features
Sysmyk® Stainless Steel Easy-Clean Long-Lasting Hydrophobic and Oleophobic Anti-Fouling Nano-Coating (Applicator Type) is a single-component, easy-to-clean treatment coating that utilizes nano-hybrid technology. After curing, this coating boasts an excellent metallic finish, hydrophobic and oleophobic properties, high hardness, superior abrasion resistance, outstanding resistance to metal scratches, and exceptional anti-fouling performance. It also features easy-clean characteristics, allowing surface stains to be effortlessly wiped away. Stainless steel sinks treated with this nano-coating exhibit outstanding hydrophobic, oleophobic, and antibacterial effects, while simultaneously enhancing the anti-fouling, protective, polishing, and stain-resistant properties of stainless steel sinks and other metal products. As a result, daily cleaning and maintenance for household users become simple and convenient.
# Medium-temperature curing, high hardness—coating film hardness can reach 5-6H
Long-lasting and easy to clean—surface dirt can be easily wiped away.
# Low surface energy with excellent anti-fouling properties and outstanding wear resistance
# Exhibits excellent hydrophobic and oleophobic properties, with a surface tension of less than 24 dynes.
Ⅲ Applicable Materials
Brushed stainless steel
Ⅳ Curing Method
Heat-curing
V. Scope of Application
Hydrophobic and oleophobic easy-to-clean treatment for surfaces such as stainless steel sinks.
VI Technical Parameters
VII Construction method
* Pre-construction preparation
1. Before spraying, first perform surface treatment on the object to be coated, removing any old paint films, rust, oil stains, oxide scales, and foreign debris from the surface. The surface must be free of rust, oil stains, dust, and water marks.
2. The cleaned surface should be sprayed promptly to prevent dust from reattaching.
3. The construction environment must be dust-free and equipped with ventilation systems or corresponding air-dust removal equipment to ensure construction quality.
* Coating
1. Stir thoroughly before use; air spraying can be used for application.
2. Spray pressure: 0.3–0.4 MPa; spray distance: 15–25 cm; recommended coating film thickness: 5–10 μm.
3. Construction temperature: 10–40 °C; relative humidity: 25%–75%.
4. Diluent: We recommend using the dedicated NOVclean™ 6758 diluent; the maximum diluent addition rate should not exceed 10%.
VIII Storage
Recommended storage temperature: 18–25°C Shelf life: 3 months
Ⅸ Packaging
1 kg/bottle, 20 kg/drum
X Environmental Protection
Safety recommendations/transportation regulations—please refer to the MSDS safety manual.
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
