Product center
BaishanProduct Model: ZCP0024D
Category:
Product Description
Sysmyk® Photovoltaic Glass: Self-Cleaning, Dust-Resistant, Light-Enhancing, and Wear-Resistant Nano-Coating
[Product Code] ZCP0024D
[Product Features]
ZCP0024D is a newly developed, single-component, room-temperature self-drying, dust-resistant, anti-fouling, and light-transmitting inorganic nanocoating by Hissen-Mech. It employs... The nano-hollow silica fractal composite technology can create micro-roughness with dimensions below 50–100 nm on the surface of objects. After curing, the coating exhibits a water contact angle of less than 10° and maintains a water contact angle of less than 25° over the long term. The coating effectively suppresses static electricity generation on the substrate surface, making it difficult for dust to adhere. Even if dust does accumulate, it can self-clean upon contact with water, ensuring that the photovoltaic glass surface consistently retains its transparency and cleanliness. Made entirely from inorganic components, this coating boasts excellent weather resistance and abrasion resistance, reducing efficiency degradation in crystalline silicon photovoltaic modules and increasing the average power output gain of conventional modules by more than 3–5%.
◼ Quick-drying at room temperature: It dries to the touch within 1-5 minutes; full curing takes 24 hours, with a hardness of over 3H (Mitsubishi Pencil, Japan).
◼ Wear and weather resistance: Compared to the 1,000-cycle wear life of conventional superhydrophilic coatings, this product boasts a significantly higher durability. 25,000 times The above wear resistance life, Purely inorganic composition, excellent weather resistance, with protective effects lasting over 5 years.
◼ Dust-repellent property: Surface resistivity is 10. 6 -10 9 Between Ω, significantly reduce dust adhesion.
◼ Anti-reflection performance: High transparency, low reflectivity, and significant anti-reflection enhancement, boosting component gain by 2.0–2.2%.
◼ Hydrophilicity: High surface energy, a water contact angle of less than 10° in the short term and less than 25° in the long term, allows the surface to self-clean from dust or stains when exposed to rainwater or condensation, thereby reducing the frequency of cleaning.
◼ Increased power generation: Anti-reflective, anti-static, and dust-repellent—comprehensively boosts power generation by more than 5%.
[Main Ingredients]
Nano-scale inorganic resin, catalysts, nano-hollow silica, nano-tin dioxide, ethanol, water, and others.
[Applicable Materials]
◼ Photovoltaic glass
◼ Solar photovoltaic modules
【Curing Method】
◼ Self-drying at room temperature; fully cured after 24 hours of standing.
【Scope of Application】
◼ Self-cleaning and dust-resistant treatment for centralized photovoltaic power stations
◼ Self-cleaning and dust-resistant treatment for distributed photovoltaic modules
[Technical Parameters]
[Construction Method]
◼ Pre-construction Preparation and Precautions
1. Before applying the coating, first clean the glass surface of the photovoltaic module using the specialized cleaning agent QCP0091ST (a multi-functional cleaning agent specifically designed for photovoltaic glass) to remove any residual anti-reflection coatings as well as dust and dirt.
2. It is recommended to directly spray QCP0091ST (Multifunctional Cleaning Agent for Photovoltaic Glass) onto the surface, wait 30 seconds to 1 minute, and then use photovoltaic glass cleaning equipment to perform the treatment. After completion of the treatment, simply rinse thoroughly with clean water. Finally, use a pH test strip (ranging from 1 to 12) to check the pH value; if the pH is neutral, the surface is considered thoroughly cleaned.
3. The cleaned surface should be coated promptly to prevent dust from settling again.
4. Avoid construction when it’s raining.
◼ Construction Method
1. Use specialized construction equipment for scraping or spraying.
2. Effective for 3–5+ years with a single treatment (depending on the specific scenario and duration).
[Storage]
Recommended storage temperature: 18–25℃
Shelf life: 6 months
[Packaging]
20L/bucket
Get the latest information about Hisenmec first
Global Innovation · Nano Coating Materials and Application Solutions
Global leading nano coating solution
